Battery Calculator

Battery Calculator

ダウンロード: App Store
ロゴ: Battery Calculator

バッテリー計算機:プロフェッショナル向け精密サイジング&稼働時間ツール

DIYまたはエンジニアリングプロジェクト向けに、業界標準の計算式を使用して、リチウムイオン電池および鉛蓄電池システムのバッテリー寿命、容量、サイジングを正確に計算します。

ダウンロード: App Store

開発元

Tan Chia Ling

カテゴリ

Utilities

ダウンロード

2K+

ユーザー評価

1.0/5

評価数

0

対応言語

1

一目でわかる精度

このインターフェースを利用する 2K+ 人のユーザー.

バッテリー寿命の推定時間を容量と消費量に基づいて計算しているモバイルアプリの画面

バッテリー寿命の推定時間を容量と消費量に基づいて計算しているモバイルアプリの画面

一般的なバッテリー容量の選択メニューを表示しているバッテリー寿命計算機のインターフェース

一般的なバッテリー容量の選択メニューを表示しているバッテリー寿命計算機のインターフェース

容量と消費量に基づいてバッテリー稼働時間の推定値を示すバッテリー寿命計算アプリのインターフェース

容量と消費量に基づいてバッテリー稼働時間の推定値を示すバッテリー寿命計算アプリのインターフェース

バッテリー容量と消費量に基づいて15分の推定稼働時間計算を表示するバッテリー寿命計算アプリのインターフェース

バッテリー容量と消費量に基づいて15分の推定稼働時間計算を表示するバッテリー寿命計算アプリのインターフェース

電圧とアンペア時の入力フィールドを備えたバッテリー容量計算ツールのスクリーンショット

電圧とアンペア時の入力フィールドを備えたバッテリー容量計算ツールのスクリーンショット

電気データ入力と結果を表示するバッテリー容量計算機のインターフェース

電気データ入力と結果を表示するバッテリー容量計算機のインターフェース

鉛蓄電池のサイジングツールを表示し、25アンペア時の結果を示すバッテリー計算アプリのスクリーンショット

鉛蓄電池のサイジングツールを表示し、25アンペア時の結果を示すバッテリー計算アプリのスクリーンショット

リチウムイオン電池に必要な容量計算を表示するバッテリーサイズ計算アプリのインターフェース

リチウムイオン電池に必要な容量計算を表示するバッテリーサイズ計算アプリのインターフェース

アンペア時とワット時で必要なバッテリー容量を示すバッテリーサイズ計算機のインターフェース

アンペア時とワット時で必要なバッテリー容量を示すバッテリーサイズ計算機のインターフェース

負荷と電圧の入力を基に必要なバッテリーサイズのアンペア時とワット時での計算を示すバッテリー計算アプリのインターフェース

負荷と電圧の入力を基に必要なバッテリーサイズのアンペア時とワット時での計算を示すバッテリー計算アプリのインターフェース

精密な電力計画のために設計

このアプリを際立たせるツール、 2K+ 人のユーザーが選択.

⏱️

実稼働時間を予測

デバイスの電流ドローと特定の化学的効率率を考慮して、バッテリーがどれだけ持続するかを正確に見積もります。

高度な容量変換

様々な電圧でアンペア時とワット時をシームレスに変換し、ストレージバンクの真のエネルギーポテンシャルを理解します。

🔋

スマートバッテリーサイジング

リチウムイオン電池と鉛蓄電池システムの専門的な計算式を使用して、特定の負荷と期間に必要な正確なバッテリー定格を決定します。

アプリについて

について知っておくべきこと Battery Calculator.

説明

Battery calculator include battery life calculator, battery capacity calculator and battery size calculator. battery life calculator uses battery capacity and device consumption to calculate estimated run time of battery life. battery size calculator calculates battery capacity, measured in amp hours based on energy stored in a battery, expressed in watt-hours and the voltage of the battery. battery size calculator calculates required the battery rating in ampere hour based on load, duration and discharge level. Formula: Battery Life Calc battery life = BC/DC * (BE/100) where: BC - capacity of your battery, measured in ampere hours [Ah] or miliampere hours [mAh]. This value is printed on your battery. DC - average current draw from electronic device, expressed in amperes [A] or miliampere [mA]. BE - The battery efficiency is the ratio of the energy retrieved from the battery, to the energy provided to the battery, when coming back to the same SOC state. Lithium-ion stays close to 90%. Lead acid batteries are lower at about 90%, and nickel-based batteries are closer to 80%. Battery Capacity Calc E = V * Q where: E - energy stored in a battery, expressed in watt-hours [Wh] or kilowatt-hours [kWh]. V - voltage of the battery. Q - battery capacity, measured in ampere hours [Ah] or miliampere hours [mAh]. Battery Size Calc Current calculation: If the load is specified in watt, the current is calculated as: I = P * V where: I - current in ampere. P - power in watts. V - voltage in volts. Lithium-ion batteries size = (100*I*t) / (100–Q) Lead-acid battery size = (100*I*t) / ((100−Q) * (0.02*t+0.6)) where: I - current in ampere. t - duration in hours. Q - required remaining charge in percentage. A battery rated for 100 Amp hours will provide 5 Amps for 20 Hours. If it is a 12 volt battery, multiply 100 by 12 and the battery will provide 1200 Watt Hours. divide the result by 1000 and the battery can supply 1.2 kW hours for the metric 'kilo' prefix. A kilowatt hour is a measure of energy used by an appliance if it were kept running for one hour. To keep in mind. Since the Amp Hour rating is a 20 Hour rating, so we need to treat kilowatt conversion as 20 hour rating. For the 1200 Watt Hour conversion, the battery will provide 60 Watts for 20 Hours. Ampere is an electrical unit used to measure the current flow towards the load. The battery life or capacity can be calculated from the input current rating of the battery and the load current of the circuit. Battery life will be high when the load current is less. You can determine the time that how long the battery charge will last. For example, a circuit connected with 1000 mAh current rating and it is connected to the load of 20 mAh. Then the battery will last for 50 hours. Batteries are available in different current rating due to its high requirement of different industrial and domestic purposes. Any battery life can be easily calculated by the values of battery capacity in mAh/Ah and load current in mA/A. Thanks for your support and do visit nitrio.com for more apps for your iOS devices.

最新バージョン

1.3

サイズ

0.8 MB

リリース日

2017年4月26日

精密な計算でプロジェクトをパワーアップ

今すぐバッテリー計算機をダウンロードして、DIYまたはプロのビルドに正確な稼働時間、サイジング、容量の測定値を入手してください。

ダウンロード: App Store

App information, icons, screenshots, and descriptions displayed on this page are sourced from the Apple App Store and are the property of their respective developers. Download estimates and rankings are based on MWM's proprietary models and may not reflect actual figures. This page is provided for informational and analytical purposes only.

Believe this page infringes your intellectual property? File a dispute